+
  • 图片高清处理(1787801755825).jpg
  • 图片高清处理 (1)(1787801755917).jpg
  • 图片高清处理 (2)(1787801755952).jpg

Sintered Plate

The ultra-high filtration efficiency of Sintered Plates is achieved by sintered polyethylene matrix coated with PTFE membrane,which reflects the advantages of rigid matrix combined with membrane filtration;This is different from the filtration efficiency of bag filters,which is based on the secondary filtration of adhered dust.From the measured data,it can be seen in most cases,the residual concentration of dust collector exhaust can be maintained lower than 1mg/m3.

Category:

Additional Products


Contact Us

Features and Advantages

图片名称

图片名称

图片名称

图片名称

Due to the complete hydrophobicity of the material and coating used to make the filter plate,an interesting phenomenon will be observed when water is sprayed: condensed water droplets gather and flow down.The situation where fabric filter bags form a water film due to moisture absorption,causing a sharp increase in resistance,no longer exists in sintering plate filter.This will achieve good results in dealing with high-temperature smoke and condenses,as well as highly hygroscopic dust such as ammonium phosphate,calcium chloride,soda ash,and mirabilite.